Heater Parts Replacement

the part of gas boiler, water fittings and adjustable spanner

Our HVAC Team Has You Covered

When it comes to heater parts replacement in Tustin, CA, you can count on our team at Universal Plumbing Heating and Air to get the job done the right way. We have the experience and knowledge necessary to ensure that your replacement parts are properly installed and working correctly. We’ll work quickly and efficiently to get your heater up and running again, so you can get back to enjoying your home. Contact us today at 949-619-3081 to schedule a consultation.

The Importance of HVAC Manufacturer Warranties

If your heater parts are giving you trouble, the first thing you should do is check to see if they’re still under warranty. Many manufacturers offer warranties on their products, so if your parts are defective, you may be able to get a replacement from the company. If not, your next best bet is to contact a local heating and cooling contractor. They’ll be able to help you troubleshoot the problem and may even be able to replace the part for you. Finally, if all else fails, you may need to replace the part altogether. Whatever route you decide to take, be sure to ask plenty of questions so that you can make an informed decision about your heater parts.

Potential HVAC Problems

Many potential problems can occur with furnaces. Some of the most common issues include:

  • The furnace not generating enough heat
  • The furnace generates too much heat
  • The furnace cycling on and off too frequently
  • Strange noises coming from the furnace
  • The furnace failed to start up altogether

If you are experiencing any of these problems, it is important to contact a qualified technician as soon as possible. Attempting to repair an electric furnace can be extremely dangerous, and should only be done by someone with the proper training and experience.

HVAC Parts Problems

There are a few different types of problems that can occur with heater parts. The most common issues are with the pilot light, the igniter, or the burners. If your pilot light keeps going out, it could be due to a problem with the thermocouple. This is a safety device that tells the gas valve when to open and close. If it isn’t working properly, it can cause the pilot light to go out. If your igniter isn’t working, it could be due to a problem with the electrode. This is what produces the spark that lights the gas. If there is corrosion on the electrode, it can prevent it from sparking.

If your burners aren’t lighting, it could be due to a problem with the gas valve. This is what controls the flow of gas to the burners. If it isn’t working properly, it can prevent the gas from flowing and the burners from lighting.

These are just some of the most common problems that can occur with heater parts. If you’re having any issues with your heater, be sure to contact a professional for help.

Schedule an HVAC Inspection Today

If you are experiencing any of these electric furnace problems, or if you think your furnace may be malfunctioning, be sure to contact a professional for help. A qualified technician will be able to diagnose the problem and make the necessary repairs. It is important to have a regular maintenance schedule in place. This will help to identify any potential issues early on before they become serious problems. Additionally, regular inspections by a qualified professional can help to keep your furnace in good condition and prevent costly repairs down the line.

If you are not sure how often your furnace should be serviced, consult your owner’s manual or contact a local HVAC professional. They will be able to advise you on the best schedule for your particular model of furnace. If you’re in need of heater parts, we can help you out. We carry a wide variety of parts for all types of heaters. Whether you need a new heating element or thermostat, we have what you need. We also offer same-day shipping on most orders, so you’ll get your parts fast. Give us a call for heater parts replacement in Tustin, CA today.

Domestic mechanical industrial concept. Mechanic repairing washing machine. Person using tools to fix broken device.

Contact Us For Help

When it comes to heater parts replacement in Tustin, CA, we’re here to help. We have a wide selection of replacement parts available, and our team is ready to assist you in finding the right ones for your needs. We’ll make sure that your replacement parts are compatible with your existing system, and we’ll install them quickly and efficiently. Contact Universal Plumbing Heating and Air today at 949-619-3081 to learn more about our replacement parts services.

Most Recent Pins (83)

Petar Dekic
Universal Plumbing Heating and Air completed an AC repair on May 18, 2023. Technicians restored the unit's cooling function by identifying and fixing system faults. This service helped maintain indoor temperature control and supported efficient operation. Location details were not provided.
Petar Dekic
Universal Plumbing Heating and Air installed a new motherboard, added leak sealant, and recharged the system with 5 pounds of R22 refrigerant in San Juan Capistrano, California. This service restored full functionality to the air conditioning system.
Check-in Location
Petar Dekic
A technician installed a limit switch for a furnace in San Clemente, California. This component helps control the temperature by switching the furnace on or off based on heat levels, supporting safe and efficient operation.
Check-in Location
Petar Dekic
Technicians installed a new motherboard and exhaust blower motor for a furnace in San Juan Capistrano, California. This service restored proper airflow and system control, improving overall heating system function.
Check-in Location
Petar Dekic
Technicians installed a new motherboard for a residential furnace in San Juan Capistrano, California. This service restored proper system function and improved heating control. The work involved safely replacing internal components and verifying system performance after installation.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a transformer and blower fan sensor in San Juan Capistrano, California. This service helps support proper airflow and system control in HVAC units, improving overall system performance and reliability.
Check-in Location
Petar Dekic
Technicians installed a new pressure switch for a furnace in Laguna Niguel, California. This service helps maintain proper airflow and ensures the furnace operates safely. Replacing a faulty pressure switch can prevent system shutdowns and improve heating performance.
Check-in Location
Petar Dekic
A technician installed a transformer for a furnace in Laguna Niguel, California. This service supports proper furnace function by ensuring consistent voltage delivery, helping prevent outages or equipment failure.
Check-in Location
Petar Dekic
Technicians installed a new blower motor and main control board for an HVAC system in Laguna Hills, California. This service ensures proper airflow and reliable operation of heating and cooling equipment. The update supports system performance and helps maintain consistent indoor temperatures.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a 3-ton furnace in a closet in Mission Viejo, California. The team completed the furnace installation with proper placement for efficient space use and heating performance.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed an HVAC thermostat in Laguna Hills, California. The team connected the new thermostat, tested system functionality, and ensured proper temperature control. This service helps maintain accurate heating and cooling performance.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a 3-ton furnace in Fresno, California. The team completed the installation to support efficient heating for the home. This furnace helps maintain consistent indoor temperatures and ensures reliable performance during colder months.
Petar Dekic
A technician replaced the start capacitor and relay in an HVAC system in Irvine, California. This service helps restore proper functioning by ensuring reliable compressor startup and consistent cooling or heating performance.
Check-in Location
Petar Dekic
A technician installed a new fan motor, added R22 refrigerant, and applied leak seal to an HVAC unit in Newport Beach, California. This service helped restore proper airflow and address refrigerant loss in the system.
Check-in Location
Petar Dekic
A technician added R22 Freon and applied a leak seal to an air conditioning system in Newport Beach, California. This service helps maintain cooling performance and addresses refrigerant loss due to small leaks.
Check-in Location
Petar Dekic
Technicians installed a 4-ton furnace in an attic in Irvine, California. This service ensured proper heating system placement and secure installation. The attic setting required careful equipment handling to support long-term performance and efficient airflow throughout the home.
Check-in Location
Petar Dekic
A technician replaced a condensation overflow sensor on an HVAC unit in Irvine, California. This service restores proper moisture drainage and prevents water damage caused by sensor failure. Prompt replacement helps maintain system efficiency and avoid shutdowns or indoor leaks.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a new condenser, disconnect box, and pad in Irvine, California. The team pulled a vacuum and flushed the refrigerant lines with a cleaning solution to prepare the system for operation.
Check-in Location
Petar Dekic
Technicians installed a 4-ton furnace and connected new condensation drain lines in Irvine, California. This service improved heating efficiency and ensured proper drainage for the system.
Check-in Location
Petar Dekic
Technicians replaced a damaged condensation drain pan and cleaned the evaporator coil in Irvine, California. This service helps improve airflow efficiency and reduces moisture buildup in HVAC systems. Regular maintenance like this supports system performance and prevents water damage.
Check-in Location
Petar Dekic
Technicians replaced the control board in a condenser, recharged the system with 410A refrigerant, and applied leak seal to address system leaks. This HVAC service took place in Irvine, California.
Check-in Location
Petar Dekic
A technician pulled a vacuum and recharged an AC unit with R-410A refrigerant in Irvine, California. This service helps restore cooling performance by removing air and moisture from the system before adding the proper refrigerant charge.
Check-in Location
Petar Dekic
Technicians replaced a faulty capacitor, added R-410A refrigerant to restore charge, and applied leak seal to address system issues. This HVAC service was completed in Irvine, California.
Check-in Location
Petar Dekic
Technicians installed two mini split units in Tustin, California. The installation supports energy efficiency and allows for independent temperature control in multiple rooms, improving overall climate management in the home.
Check-in Location
Petar Dekic
A technician added R22 freon, sealed a refrigerant leak, and replaced a capacitor on an HVAC system in Irvine, California. These repairs help restore system efficiency and ensure proper cooling performance.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air cleared a clogged condensation line and replaced a faulty condensation float sensor in Irvine, California. This service restored proper drainage and prevented potential water damage in the HVAC system.
Check-in Location
Petar Dekic
A technician installed a 3-ton evaporator coil for an HVAC system in Irvine, California. This service improves airflow and cooling efficiency for residential climate control systems. Proper coil installation helps maintain system performance and supports energy-efficient operation across seasonal changes.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a 4-ton condenser with a pad and disconnect box in Irvine, California. The team ensured proper placement and secure electrical setup to support reliable cooling system performance.
Check-in Location
Petar Dekic
Technicians added 3 pounds of R-410A refrigerant, applied leak seal, and installed a new contactor for an HVAC system in Santa Ana, California. This service helped restore proper cooling performance by addressing low refrigerant levels and electrical component failure.
Check-in Location
Petar Dekic
A technician replaced a faulty capacitor and added 410a refrigerant to restore an HVAC system. This service improved system cooling and stability. Completed in Irvine, California.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a wire harness, replaced the contactor, and added a 6010mfd capacitor in Irvine, California. This electrical upgrade supports reliable HVAC system performance through improved connectivity and component function.
Check-in Location
Petar Dekic
Technicians replaced the compressor, pulled a vacuum, and added R410a refrigerant to fully charge the system in Irvine, California. This HVAC service ensures proper cooling function and supports efficient system operation.
Check-in Location
Petar Dekic
Technicians replaced a contactor and a 45x7.5 mfd capacitor in an HVAC system in Tustin, California. This service restored proper electrical flow and helped the air conditioning unit run efficiently.
Check-in Location
Petar Dekic
A technician replaced a HVAC motherboard and a 50x5 MFD capacitor at a residential property in Irvine, California. This service restored proper electrical function and system control, ensuring the unit operated safely and efficiently.
Check-in Location
Petar Dekic
A technician in Irvine, California replaced a faulty compressor, pulled a vacuum, and recharged the HVAC unit with R410a refrigerant. This service restored proper cooling performance and ensured efficient operation of the air conditioning system.
Check-in Location
Petar Dekic
A technician added 4 pounds of R22 freon, sealed a refrigerant leak, and replaced core valves and caps on an HVAC system in Santa Ana, California. This service restored cooling efficiency and helped prevent future refrigerant loss.
Check-in Location
Petar Dekic
Technicians added R22 freon, applied leak sealant, and replaced core valves and caps on an HVAC system in Irvine, California. This service helps maintain proper refrigerant levels, reduce leakage, and improve system reliability.
Check-in Location
Petar Dekic
A technician replaced an indoor blower motor in Santa Ana, California. This service helps maintain airflow within the HVAC system, supporting efficient heating and cooling performance in residential or commercial properties.
Check-in Location
Petar Dekic
Technicians located and repaired a condenser leak, evacuated the HVAC system to 500 microns, and recharged it with 12 pounds of R410a refrigerant. They completed testing to confirm system function. Service took place in Irvine, California.
Check-in Location
Petar Dekic
A technician in Laguna Niguel, California installed a capacitor, added R22 refrigerant, applied leak sealant, and replaced core valves and caps in an HVAC system. This service restored system performance by addressing minor leaks and ensuring proper refrigerant levels.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a new fan blower motor, added R410a refrigerant, applied leak sealant, and replaced core valves and caps in Laguna Niguel, California. This HVAC service improved system function and addressed refrigerant loss.
Check-in Location
Petar Dekic
A technician added R410a refrigerant and introduced a leak seal to an HVAC system in Laguna Hills, California. This service helps restore cooling performance and prevent further refrigerant loss by addressing minor leaks in the system.
Check-in Location
Petar Dekic
A technician in Laguna Niguel, California replaced a capacitor, added R410a refrigerant, and applied leak seal to an HVAC system. This service helps restore system pressure, improve cooling efficiency, and prevent future refrigerant loss.
Check-in Location
Petar Dekic
A technician installed a new capacitor and relay for an HVAC system in Laguna Niguel, California. The service ensured proper electrical function and improved system reliability. This work helps maintain consistent cooling performance during warmer months.
Check-in Location
Petar Dekic
Technicians added R22 refrigerant, sealed a system leak, and replaced core valves and caps on an HVAC unit in Laguna Niguel, California.
Check-in Location
Petar Dekic
A technician in Newport Beach, California replaced a capacitor, relay, and motherboard in an HVAC system. They also checked freon levels to ensure proper cooling performance. This service helped restore system function and maintain energy efficiency during peak summer use.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air replaced a blower fan motor, added 3 pounds of R22 refrigerant, applied leak seal, and installed new core valves and caps for an HVAC system in Newport Beach, California.
Check-in Location
Petar Dekic
A technician installed a new 50mfd capacitor and checked freon levels for an HVAC unit in Newport Beach, California. This service helped maintain proper cooling performance and ensured system reliability during peak usage.
Check-in Location
Petar Dekic
A technician replaced the contactor and relay and checked freon levels in an HVAC system in Newport Beach, California. This service ensures proper cooling performance and safe electrical operation for residential or commercial units.
Check-in Location
Petar Dekic
Technicians replaced the motherboard and blower fan and checked refrigerant levels on an HVAC system in Newport Beach, California. The service ensured proper airflow and system cooling performance.
Check-in Location
Petar Dekic
Technicians added 2 pounds of R-22 refrigerant, introduced leak seal, replaced core valves and caps, and installed a new relay to restore AC function in Newport Beach, California.
Check-in Location
Petar Dekic
Technicians replaced a blower motor and capacitor, added 1.5 pounds of R22 refrigerant, introduced leak seal, and replaced core valves and caps in Newport Beach, California. This HVAC service ensured proper system function and addressed refrigerant loss.
Check-in Location
Petar Dekic
A technician installed 50 Amp fuses, a contactor, and a 45x5 MFD capacitor, then checked refrigerant levels to ensure system performance. This electrical and HVAC service took place in Newport Beach, California.
Check-in Location
Petar Dekic
Technicians in Newport Beach, California added a leak seal to an HVAC system, charged it with 2 pounds of R410a refrigerant, replaced the core valves and caps, and installed a new contactor. This service helped restore system performance and addressed refrigerant loss.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a motherboard in a heat pump, replaced core valves and caps, added a 405mfd capacitor, recharged the system with R410A refrigerant, and applied leak seal. This HVAC service was completed in Newport Beach, California.
Check-in Location
Petar Dekic
A technician replaced a furnace motherboard and completed maintenance on the unit in Irvine, California. This service helped restore proper system function and improved overall heating efficiency. Routine maintenance also ensured reliable performance for continued use.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a new HVAC system in Mission Viejo, California. The team placed the furnace and coil in the attic and set the condenser on the side of the house. They tested the refrigerant lines for leaks and adjusted the freon level to ensure proper operation.
Check-in Location
Petar Dekic
Technicians removed old insulation from the plenum and coil, then installed new insulation to improve system function. This HVAC service took place in Irvine, California.
Check-in Location
Petar Dekic
A technician in Irvine, California changed core valves and freon port caps, added leak seal, and recharged the HVAC system with 2 pounds of R22 refrigerant. The unit was tested to confirm proper function after service.
Check-in Location
Petar Dekic
A technician cleared a blocked condensation line and tested the system to ensure proper drainage in Irvine, California. This service helps prevent water buildup and supports efficient air conditioning performance.
Check-in Location
Petar Dekic
Technician replaced core valves and port caps, applied leak seal to the HVAC system, and added 2.5 pounds of R22 refrigerant in Irvine, California.
Check-in Location
Petar Dekic
A technician installed a new 40 Amp disconnect box in Irvine, California. This upgrade supports safe and efficient power shutoff for HVAC or electrical systems, helping maintain code compliance and equipment protection.
Check-in Location
Petar Dekic
Technicians in Irvine, California replaced a capacitor, changed core valves and port caps, added a leak seal, and filled the HVAC system with 3 pounds of R22 refrigerant. This service restored system performance and addressed leak issues in the cooling unit.
Check-in Location
Petar Dekic
Technicians serviced five HVAC units in Mission Viejo, California. They added leak seal, recharged systems with R22 and R410A refrigerants, replaced capacitors, installed new core valves, and changed port caps. Each unit was tested to ensure proper function.
Check-in Location
Petar Dekic
Technicians in Laguna Niguel, California replaced a 50x5 capacitor, changed core valves, added R-22 refrigerant to restore full charge, replaced port caps, and tested the HVAC unit for proper operation.
Check-in Location
Petar Dekic
Technicians in Laguna Niguel, California replaced a relay, added R22 refrigerant to recharge the system, introduced leak sealant, installed new core valves, replaced port caps, and tested the HVAC unit for proper function.
Check-in Location
Petar Dekic
A technician in Laguna Niguel, California repaired a leak on a freon line, pulled a vacuum to 500 microns, added freon for a full charge, and replaced core valves and caps. The technician completed all necessary tests to confirm proper system function.
Check-in Location
Petar Dekic
Technicians replaced a control board and core valves in a heat pump system in Laguna Niguel, California. They added leak seal, recharged the unit with R-22 refrigerant, installed new port caps, and tested system performance.
Check-in Location
Petar Dekic
Technicians in Laguna Niguel, California replaced the contactor, installed new core valves, sealed a leak, replaced caps, and tested the HVAC unit. This service restored system function and improved operational reliability through targeted part replacement and system testing.
Check-in Location
Petar Dekic
Technicians installed new core valves, sealed a refrigerant leak, added R410a freon, replaced caps, and tested the HVAC unit for performance. Service completed in Laguna Niguel, California.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a 5-ton furnace in Irvine, California. The team completed the furnace installation to support effective heating for a large space. This service ensures reliable temperature control for improved indoor comfort during colder months.
Check-in Location
Petar Dekic
A technician installed a new HVAC thermostat and inspected the entire system for proper function in Newport Beach, California. The service ensured accurate temperature control and verified that all system components operated correctly.
Check-in Location
Petar Dekic
Technicians added R22 refrigerant, introduced leak sealant, replaced core valves and caps, and changed the system filter. This HVAC service took place in Costa Mesa, California.
Check-in Location
Petar Dekic
Technicians added 410A refrigerant, sealed system leaks, and replaced core valves and caps on an HVAC unit in Laguna Niguel, California. This service restored cooling performance and improved system reliability for the customer.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air replaced a 5-ton HVAC unit in Ladera Ranch, California. The team removed the old system and installed the new unit to restore efficient heating and cooling. This service helps maintain indoor comfort and supports proper ventilation for year-round climate control.
Check-in Location
Petar Dekic
Technicians added R22 Freon, sealed a leak, and replaced core valves and caps on an HVAC system in San Clemente, California. This service helped restore cooling efficiency and prevent future refrigerant leaks.
Check-in Location
Petar Dekic
A technician replaced the HVAC unit filter in Laguna Niguel, California. This service helps maintain air quality and improves system performance by ensuring airflow remains unobstructed. Regular filter replacement supports energy efficiency and extends equipment life.
Check-in Location
Petar Dekic
A technician repaired a wall heater in Laguna Niguel, California. The service restored heating by identifying and fixing the fault in the unit. This ensured the appliance operated safely and efficiently for the resident.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a commercial HVAC unit and connected new ductwork in Aliso Viejo, California. The team completed the setup to support efficient heating and cooling for a business facility.
Check-in Location
Petar Dekic
Technicians repaired a leak on a commercial HVAC duct in Laguna Hills, California. The service restored proper airflow and prevented energy loss in the building’s ventilation system. This type of duct repair helps maintain system efficiency and supports consistent indoor air quality for commercial properties.
Check-in Location
Petar Dekic
Technicians replaced ductwork in Mission Viejo, California. The crew removed outdated ducts and installed new systems to improve airflow and performance. This service helps maintain consistent indoor temperatures and supports overall HVAC efficiency.
Check-in Location
Petar Dekic
Universal Plumbing Heating and Air installed a wall heater in Irvine, California. The team secured the unit, connected the gas line, and tested the system for safe operation. This service ensures reliable indoor heating for residential spaces during colder months.
Check-in Location
Petar Dekic
Technicians replaced existing ductwork in Santa Ana, California. The service improved airflow and supported consistent indoor temperature by installing updated ducting throughout the property.
Check-in Location
Check-ins - Reviews - Content - Ranking

Most Recent Reviews (3)

May 18, 2023
Very efficient and honest service.
Karen
Jan 22, 2023
Peter was : Communicative Kind Professional On time A quick worker Our furnace broke and Peter didn’t make us wait to get it fixed he came right away and made sure the job was done fast so we could have our heater back. He was great at communicating and working with our schedule needs. It’s also important to feel like you can trust the person working in your home and that’s how I felt with Peter when I was home alone with my baby. Thank you Peter, we appreciate your hard work!
review Photo
Ashley
Oct 01, 2022
Outstanding service and price!!!
review Photo
Ming
Check-ins - Reviews - Content - Ranking